Shopping Cart
0 item(s) - $0.00

Niwalker Nova MM15MB 2x XHP70 LED Flashlight/ Searchlight 6800 L


Always Free Shipping


  • Utilizes two U.S. made Cree XHP70 LED chip 
  • Maximum output up to 6800 ANSI lumens
  • Highly efficient circuit design offers maximum output and runtime
  • Multi-function clicky side switch with momentary activation and on/off
  • Memory function to remember last output setting used (except hidden modes)
  • Advanced thermal protection circuit prevents overheating
  • Light orange peel reflector creates great throw distance and beam pattern
  • Aircraft grade aluminum, mil-spec hard anodized for maximum wear
  • Toughened ultra-clear tempered glass lens with anti-reflective coating
  • Large copper heat sink pad for superior thermal conductivity
  • LED indicator turns red to alert user to switch lower output mode and recharge batteries in time


Technical specifications
Light output / runtime
     Mode 1 : 3 lumens / 31days
     Mode 2:  22 lumens / 8days
     Mode 3: 255 lumens / 31 hrs
     Mode 4: 1200 lumens / 6.8hrs
     Mode 5: 2625 lumens / 2.8 hrs
     Turbo: 6800 lumens / 2.6 hrs
Max beam distance: 303 meters
Peak beam intensity: Lux: 23.000
Waterproof: To IPX-8 standard
Impact resistance: 1.5M
Above data was tested base on ANSI-FL1 standard
Batteries: four 18650 rechargeable batteries(not include)
Dimensions: 114mm(length) x 64mm(head diameter)
Weight: 333g (without battery)

Included accessories
Spare o-rings

User Interface
Turn the light ON/OFF by the side switch. Once you release the switch, the light
comes on constant output mode.

Presshold the switch from ON to cycle through all the modes: Mode 1 > Mode 2 >
Mode 3 > Mode 4 > Mode 5. Release the switch to select the desired output with
mode memory.

Double-click from ON to access Turbo. Double-click again for strobe. 
Double-click again for strobe. Another double-click for SOS. 
Another double-click for beacon. Single click gets you back to regular mode.
Note there is no mode memory for hidden modes.

Turbo mode steps down to mode 5 when thermal protection kick in
to prevent overheating.

When in standby, press-hold the switch for momentary activation (6800 lumens)
Double press and hold the switch for constant 6800 lumens. (Second press-hold within 1.5s)
Double-click for instant strobe.

Lock-out mode is accessed by a rapid triple-click of the switch from OFF. 
The two XHP70 emitters will flash twice to indicate the lock-out is engaged
Another triple-click re-activates.
Standby indicator flashes when batteries are connected but the light is not on. 
A brief green flash of the switch occurs every three seconds.



Please use high drained quality batteries.  Pleas do NOT this light unattened.  Please caution when using higher output levels. Light body gets hot when the light is on for long period of time and avoid shinning the beam directly into the eyes. This product is high power device and capable of causing eye damage.

Specifications are subject to change without prior notice. Pleas always refer to our official site for the latest information.

Add to Cart:

  • Model: MM15MB
  • Shipping Weight: 2lbs
  • Manufactured by: Niwalker

Back to top