Shopping Cart
0 item(s) - $0.00

Niwalker Nova MM15 4 x 18650 CREE MT-G2 P0 5233 Lumen LED Flashl


Always Free Shipping
Fast, Free Priority Mail Shipping (US)!  And FREE International Shipping!
Utilizes two U.S. made top binned Cree MT-G2 P0 LED chip 
Maximum output up to 5233 ANSI lumens
Highly efficient circuit design offers maximum output and runtime
Multi-function clicky side switch with momentary activation and on/off
Memory function to remember last output setting used (except hidden modes)
Advanced thermal protection circuit prevents overheating
Light orange peel reflector creates great throw distance and beam pattern
Aircraft grade aluminum, mil-spec hard anodized for maximum wear
Toughened ultra-clear tempered glass lens with anti-reflective coating
Large cooper heat sink pad for superior thermal conductivity
LED indicator turns red to alert user to switch lower output mode and recharge batteries in time 
Technical specifications:
Light output / runtime
     Mode 1 : 6 lumens
     Mode 2:  180 lumnes
     Mode 3: 450 lumens / 24 hrs
     Mode 4: 880 lumens / 9 hrs 25 mins
     Mode 5: 1950 lumens / 5 hrs 17mins
     Turbo: 5233 lumens / 2 hrs 10 mins
Max beam distance: 280 meters
Peak beam intensity: cd: 19.600
Waterproof: To IPX-8 standard
Impact resistance: 1.5M
Above data was tested base on ANSI-FL1 standard
Batteries: four 18650 rechargeable batteries(not include)
Dimensions: 114mm(length) x 64mm(head diameter)
Weight: 360g (without battery)
Included accessories:
Spare o-rings
User Interface:
Turn the light ON/OFF by the side switch. Once you release the switch, the light
comes on constant output mode.
Presshold the switch from ON to cycle through all the modes: Mode 5 > Mode 4 >
Mode 3 > Mode 4 > Mode 5. Release the switch to select the desired output with
mode memory.
Double-click from ON to access Turbo. Double-click again for strobe. 
Double-click again for strobe. Another double-click for SOS. 
Another double-click for beacon. Note there is no mode memory for hidden modes.
Hidden turbo mode steps down to mode 5 when thermal protection kick in
to prevent overheating.
When in standby, press-hold the switch for momentary activation (5233 lumens)
Double-click for instant strobe.
Lock-out mode is accessed by a rapid triple-click of the switch from OFF. 
The two MT-G2 emitters will flash twice to indicate the lock-out is engaged
Another triple-click re-activates.
Standby indicator flashes when batteries are connected but the light is not on. 
A brief green flash of the switch occurs every three seconds.
Please use quality high drain batteries. 
Please caution when using higher output levels. Light body gets hot when the light is on for long period of time and avoid shinning the beam directly into the eyes. This product is high power device and capable of causing eye damage.
Specifications are subject to change without prior notice. Please always refer to our official site for the latest information.

Add to Cart:

  • Model: MM15
  • Shipping Weight: 2lbs
  • Manufactured by: Niwalker

Back to top